Kongsberg cNODE - System description; Scope of supply; General supply conditions; Receipt, unpacking and storage

453694/C
7
Systemdescription
cNODEModemEmbedisdesignedforpoint-to-pointdatatransferbetweentwo
cNODEsortoasurfacevesselequippedwithanyHiPAPorμPAPsystems.
ThecNODEModemEmbedprovidesexibilitytointegratetransponderelectronics
intoacustompressurehousing.Thisreducesthesize,weightandtheneedforsubsea
interfacecabling.
ThedatatelemetryoperatesonCYMBALdigitalprotocol,Kongsbergseldproven
robustproprietylink.Dataratesofupto6kb/sareavailable.OnecNODEModemcan
addressseveralothercNODEModemsduringoperationusingtheKongsbergLinkUser
Protocol.ThemodemiseasytocongureusingtheTTCLightsoftware.
Scopeofsupply
Themainunitsaresuppliedasstandard.
•PrintedCircuitBoard(PCB)
•Transducer
•Transformer
•Cablekit(Optional)
•QuickReferenceGuide
Generalsupplyconditions
GeneralsupplyconditionsapplytothiscNODEModemEmbeddelivery.
Receipt,unpackingandstorage
Uponacceptingshipmentoftheequipment,theshipyardand/orthedealermustensure
thatthedeliveryiscompleteandinspecteachshippingcontainerforevidenceofphysical
damage.
Iftheinspectionrevealsanyindicationofcrushing,dropping,immersioninwateror
anyotherformofdamage,therecipientshouldrequestthatarepresentativefromthe
companyusedtotransporttheequipmentbepresentduringunpacking.
Allequipmentmustbeinspectedforphysicaldamage,i.e.brokencontrolsandindicators,
dents,scratchesetc.duringunpacking.Ifanydamagetotheequipmentisdiscovered,the
recipientmustnotifyboththetransportationcompanyandKongsbergDiscoverysothat
KongsbergDiscoverycanarrangeforreplacementorrepairofthedamagedequipment.
KongsbergcNODEModemEmbed