Kongsberg cNODE - Modem top section interface connector pinout J3

453694/C
15
5Usetwogreenwires(0.24mm
2
)andconnectbothtothegreenwirefromthe
transducer.
6Useoneorangewire(0.24mm
2
)andconnecttotheorangewirefromthetransducer.
7Addcrimpterminalstotheendofthewires.
8InstallthecrimpterminalsinaMolex8-pinreceptacleaccordingtothecable
drawing.
aConnectthegreenwirestopin1and5onthereceptacle.
bConnecttheblackwirestopin3and7onthereceptacle.
cConnectthebluewirestopin4and8onthereceptacle.
dConnecttheorangewiretopin6onthereceptacle.
ThisisnowreceptacleJ1.
9ConnectreceptacleJ1toconnectorP1onthefrontofthePCB.
InstallingthecNODEModemEmbedcables