Kongsberg cNODE Micro - Disconnecting the Cnode Battery Charger

32
426351/A
Procedure
1Switchoffthetransponder.
2Letthebatteryclimatisetoanambienttemperature
beforecharging(10°Cto40°C).
3ConnectthecNODEbatterychargerplugto
theconnectoronthecNODEMicromarked
CHARGE.
–Seelabel1intheillustration.
4ConnectthecNODEbatterychargertomains(110
or220Vac).
–Seelabel2intheillustration.
5TheLEDindicatoronthechargerwillashgreen
whencharging.
.Itnormallytakesabout30secondsbeforethechargingstartsandtheLEDindicator
startsashinggreenafterconnectingthecNODEbatterychargertothecNODE
Micro.
TheLEDindicatorwillstaygreenwhenfullycharged.
Thebatterywillbechargedwithin1hour.
Result
Thetransponderisnowreadyforuse.
DisconnectingthecNODEbatterycharger
ItisveryimportanttoreadtheproceduresbeforedisconnectingthecNODEbattery
chargerfromthecNODEMicro.
Prerequisites
Note
AlwaysdisconnectthecNODEbatterychargerfromthemains(110or220VAC)before
disconnectingthecNODEbatterychargerfromthecNODEMicro.
Procedure
1DisconnectthecNODEbatterychargerfrommains(110or220V AC).
cNODEMicroInstructionManual