Need help?Do you have a question about the Konica Minolta AccurioPress C3080P and is the answer not in the manual?
Describes basic and operation settings for automatic inspection, including detailed configuration steps.
Guides on creating a reference image before executing an automatic inspection job by holding a print job.
Details on selecting an existing reference image for performing automatic inspection using a held print job.
How to check the automatic inspection results and take appropriate actions like reprinting.
Details the process of setting specific areas on a page for inspection, including drag operations.
Provides a table of out-of-range image report statuses, causes, and remedies for troubleshooting.
General| Max Print Resolution | 1200 x 1200 dpi |
|---|---|
| Duplex Printing | Standard |
| Hard Drive | 250 GB |
| Connectivity | Ethernet, Wi-Fi |
| Paper Weight | 52 – 350 gsm |
| Print Technology | Laser |
| Supported Media Types | Plain paper, Coated paper, Labels, Envelopes |
| Supported Media Weights | 52 – 350 gsm |
| Memory | 4 GB |
| Network Connectivity | Ethernet, Wi-Fi |
| Supported Media Sizes | A3, A4, A5, B4, B5 |
| Power Consumption | 1, 800 W |
To Next Page
