User's Guide
- 112 -
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specify the positioning of multiple-page images.
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of page images and whether they are
in portrait or landscape orientation.
Auto
Landscape
Portrait
Specify the orientation of a multiple-page document.
Note: Auto is the factory default setting. The printer chooses between portrait
and landscape.
None
Solid
Print a border on each page image.
Note: None is the factory default setting.
Off
Between Copies
Between Jobs
Between Pages
Specify whether blank separator sheets are inserted.
Notes:
• Off is the factory default setting. No separator sheets are included in the
print job.
• Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to On. If Collate is set to Off, then a blank page is inserted
between each set of printed pages, such as after all page 1's and after all
page 2's.
• Between Jobs inserts a blank sheet between print jobs.
• Between Pages inserts a blank sheet between each page of the print job.
This setting is useful when printing transparencies or inserting blank pages
in a document for notes.
Tray [x]
Manual Feeder
Specify the paper source for separator sheets.
Notes:
• Tray 1 (standard tray) is the factory default setting.
• From the Paper menu, Configure MP must be set to Cassette in order for
Manual Feeder to appear as a menu setting.
Blank Pages
Do Not Print
Print
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.