2
Before making copies
2-56 bizhub 501/421/361 (Version 2)
2
Reminder
Make sure that the paper is not loaded above the point where the paper guide starts to bend to prevent
any trouble.
Flatten the paper before loading it to prevent any trouble.
Do not climb onto the upper door of the large capacity tray to prevent any trouble.
To print on OHP transparencies, thick paper, thin paper, tracing paper, envelopes or labels, use the
bypass tray.
!
Detail
If you load a different type of paper than the one specified for LCT, change the paper type setting from
the User Setting screen. For details, refer to "Specifying user settings" on page 12-18.
To Next Page
Loading...
Need help?
General
