Konica Minolta bizhub 5020i User Manual

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not use the fax feature during a
lightning storm.
CAUTION—POTENTIAL INJURY: To reduce the risk of fire, use only a 26 AWG or larger
telecommunications (RJ-11) cord when connecting this product to the public switched telephone
network. For users in Australia, the cord must be approved by the Australian Communications and Media
Authority.
Setup 1: Printer is connected to a dedicated fax line
1 Connect one end of the telephone cable to the line port of the printer.
2 Connect the other end of the cable to an active analog wall jack.
Notes:
• You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer O).
• If you want to receive faxes automatically, then set the printer to pick up on a specified number of rings.
Setup 2: Printer is sharing the line with an answering machine
Note: If you subscribe to a distinctive ring service, then make sure that you set the correct ring pattern for
the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes
automatically.
Faxing 36

Konica Minolta bizhub 5020i Specifications

General

Print Speed	50 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Operating System Compatibility	Windows, Mac OS, Linux
Processor	800 MHz
Scan Resolution	600 x 600 dpi
Copy Speed	50 cpm
Fax Speed	33.6 Kbps
Paper Capacity	2, 300 sheets
Connectivity	USB 2.0, Ethernet, Wi-Fi
Mobile Printing	AirPrint, Google Cloud Print, Mopria
Type	Multifunction Printer