bizhub 658e/558e/458e/368e/308e 3-29
3.2 Scan-to-Send function
3
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this machine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
- In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
- If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
- For information on the default administrator password, refer to the User’s Guide CD/DVD.
To Next Page
Loading...
Need help?
General
