Need help?Do you have a question about the Konica Minolta bizhub C287 and is the answer not in the manual?
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Scan Resolution | 600 x 600 dpi |
| Duplex Printing | Yes |
| Functions | Print, Copy, Scan, Fax (optional) |
| Fax | Optional |
| Memory (RAM) | 2 GB |
| Fax Speed | 33.6 kbps |
| Max Paper Size | A3 |
| Print Speed | 28 ppm |
| Paper Capacity | Standard: 1, 150 sheets |
| Connectivity | Ethernet, USB, Wi-Fi |
| Paper Size | A3 to A5 |
| Output Paper Capacity | 250 sheets |
| Hard Disk Drive | 250 GB |
| Operating System Compatibility | Windows, Mac OS, Linux |
Details the process of unpacking and physically setting up the machine.
Procedure for installing toner cartridges into the machine.
Guidance on installing optional hardware components.
Steps for attaching accessory parts like the stylus pen.
Instructions for connecting the machine to a power source.
Steps to power on and start the machine.
Configuration steps including date, time, and serial number.
Procedure to check the non-image area for proper function.
Guide for connecting the machine to a network.
Configuration of network settings like TCP/IP.
Procedure for power cycling the machine.
Details on fine-tuning machine options for optimal performance.
Instructions for applying paper size labels to trays.
Steps for installing the holder for the user's guide.
Guide for attaching the operation panel sheet.
Verifying correct hardware components are installed.
Configuring switch settings for secure startup.
Setting up custom function patterns for the machine.
Specifies qualifications and responsibilities for service personnel.
Guidelines for securing Service Mode settings and passwords.
Precautions for service engineers during machine maintenance.
Other important notes and information for service engineers.
Specific details on checking the security-related firmware version.
Detailed instructions for accessing the service mode interface.
Information on locking access to the Service Mode for security.
Overview of specific settings related to security enhancement.
Detailed steps for implementing security enhancements.
Actions required from the administrator for security setup.
Lists functions that become unavailable when security is enhanced.
Identifies settings that are modified when security is enhanced.
Accessing and viewing firmware version information.
Configuration and use of CE authentication for service access.
Managing the administrator password for system access.
Managing the CE password for Service Mode access.
Resets machine settings to default values.
Process for formatting the machine's hard disk drive.
Configuration for whether the hard disk is installed or not.
Setting the time for releasing access lock states.
Function to release administrator password access lock.
Steps to perform the data overwrite function.
Lists data cleared when overwriting all data.
General information about firmware updating methods.
Using USB memory for firmware updates.
Prerequisites for updating firmware using USB memory.
Step-by-step instructions for firmware rewriting.
Troubleshooting steps for firmware transfer failures.
Procedure to enter machine type after hardware replacement.
Guide for installing and configuring the optional FAX kit.
Detailed steps for installing the FAX kit hardware.
Steps for installing the ferrite core on the telephone cable.
Instructions for connecting the modular telephone cable.
Applying necessary labels to the machine.
Configuration steps for the fax function.
Important warnings for dial transfer operations.
To Next Page
