To Next PageTo Next PageHow to solve 'Cannot connect to the network' error on Konica Minolta All in One Printer?
To resolve network connectivity issues with your Konica Minolta All in One Printer, ensure that the network cable is correctly connected. Also, verify that [Network Settings] in [Administrator Settings] are correctly configured.
General| Standard Paper Capacity | 1, 150 sheets |
|---|---|
| Max Paper Capacity | 3, 650 sheets |
| Functions | Print, Copy, Scan, Fax |
| Duplex Printing | Yes |
| Max Memory | 2 GB |
| Hard Drive | 250 GB |
| Print Speed | 28 ppm (pages per minute) |
| Supported Paper Sizes | A3, A4, A5, B4, B5, Letter, Legal, Custom Sizes |
| Scanner Type | CCD |
| Fax Transmission Speed | 33.6 Kbps |
| Standard Memory | 1 GB |
| Connectivity | USB 2.0, Ethernet 10/100/1000Base-T |
| Resolution | 600 x 600 dpi |
Configures essential TCP/IP settings for network connectivity, including IPv4 and DNS.
Details the configuration and restrictions for IPv6 communication.
Guides on configuring settings for the PageScope Web Connection utility.
Procedure for accessing the administrator mode for machine configuration.
Configures settings for sending scanned data via SMB transmission to a network computer.
Configures settings to send scanned data to the user's home folder via Active Directory.
Configures settings to send scanned data as an E-mail attachment.
Configures secure SMTP communication using SSL/TLS encryption.
Configures settings to send scanned data via E-mail with a digital signature.
Configures settings to encrypt E-mail using a registered public key.
Configures settings to send scanned data to a specified FTP server.
Configures settings to send scanned data to a WebDAV server.
Configures settings for printing data using the SMB protocol.
Configures settings to send Internet faxes as E-mail attachments.
Configures settings to receive Internet faxes securely.
Configures settings for sending and receiving faxes via IP network.
Configures user authentication and account track settings for MFP authentication.
Configures user authentication using Active Directory for access control.
Configures user authentication using NTLM for Windows domain environments.
Configures user authentication using LDAP server for access control.
Guides on registering device certificates for SSL communication settings.
Configures settings for using device certificates based on communication protocols.
Details on registering user certificates for sending encrypted E-mails.
Configures settings for FTP server and WebDAV server functions.
Configures settings to report machine status to the administrator via E-mail.
Configures settings to report machine status using SNMP TRAP functions.
Configures settings to report counter information via E-mail.
Allows saving (exporting) and writing (importing) machine configuration.
Creates and downloads job log data (accounting, counting, audit logs).
Lists and explains various network error codes for troubleshooting.
