Konica Minolta BIZHUB C3351 User Manual

Upgrading and migrating
Hardware
Available internal options
• User Flash
• Font cards
• Firmware cards
– Bar Code
– IPDS
• Printer hard disk
Accessing the controller board
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Using a flat-head screwdriver, open the controller board access cover.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.
Upgrading and migrating 206

Konica Minolta BIZHUB C3351 Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Control Panel	7-inch color touch panel
Copy Resolution	600 x 600 dpi
Print Speed	33 ppm
Paper Capacity	Up to 1, 650 sheets
Connectivity	USB 2.0, Ethernet 10/100/1000Base-T, Wi-Fi
Paper Sizes Supported	A4, A5, B5, Letter, Legal
Fax Speed	33.6 kbps
Mobile Printing	Yes
Type	Multifunction printer
Copy Speed	33 cpm
Fax Resolution	200 x 200 dpi
Network Connectivity	Ethernet, Wi-Fi
Monthly Duty Cycle	120, 000 pages
Duplex Printing	Automatic