How to fix a printer driver setting that cannot be selected on Konica Minolta bizhub C450 All in One Printer?
If a printer driver setting cannot be selected on your Konica Minolta All in One Printer, it is because some functions cannot be combined. Do not try to select settings that are not available.
Why can't I specify the hole punch function on my Konica Minolta All in One Printer?
You might not be able to specify the hole punch function on your Konica Minolta All in One Printer if 'Booklet', 'Transparency', 'Thick2', 'Thick3', or 'Envelope' is selected. Check each setting in the printer driver. Also, if optional finisher FS-603 is installed, the punch kit PK-501 is required; install the required optional finisher and enable it using the printer driver.
What to do if a mail sending error occurs on Konica Minolta bizhub C450 All in One Printer?
If you encounter a mail sending error on your Konica Minolta All in One Printer, the system will automatically retry sending the email after a specified time. Ensure that your network environment is working correctly and that your network settings are properly configured.
What to do if the message “Misfeed detected” appears on Konica Minolta All in One Printer?
If the message 'Misfeed detected' appears on your Konica Minolta All in One Printer, follow these steps: 1. Check the illustration displayed with the error message to determine the misfeed location, and then clear the misfeed according to the appropriate procedure. 2. If the misfed paper cannot be pulled out, pull the lever for the sliding plate of the bypass tray, and then pull the sliding plate toward you. 3. Remove all paper from the bypass tray. 4. Open the automatic duplex unit door. 5. Carefully pull out any misfed paper. 6. Close the automatic duplex unit door.
Why is the hole punch position not as expected on my Konica Minolta bizhub C450?
If the hole punch position is not as expected on your Konica Minolta All in One Printer, the orientation setting is not correct. Check the punch position on the Layout tab of the printer driver setup dialog box.
Why is the watermark not printing on my Konica Minolta bizhub C450 All in One Printer?
If the watermark cannot be printed on your Konica Minolta All in One Printer, ensure the watermark is correctly set and check the density settings. Note that watermarks cannot be printed in graphics applications, so no watermark can be printed in this case.
Why is the stapling position not as expected on my Konica Minolta All in One Printer?
If the stapling position is not as expected on your Konica Minolta All in One Printer, the orientation setting might be incorrect. Check the stapling position in the printer driver setup dialog box.
Why Konica Minolta bizhub C450 All in One Printer is unable to send a mail because the machine is in operation?
If your Konica Minolta All in One Printer is unable to send a mail because the machine is currently in operation, retry sending manually when the machine is idle. If using auto transmission, the printer will automatically retry after 1 minute.
How to adjust stapling position on Konica Minolta bizhub C450?
If the stapling position is not as expected on your Konica Minolta All in One Printer, the orientation setting might be incorrect. Check the stapling position in the printer driver setup dialog box.
How to correct hole punch position on Konica Minolta bizhub C450?
If the hole punch position is not as expected on your Konica Minolta All in One Printer, the orientation setting might be incorrect. Check the punch position on the layout tab of the printer driver setup dialog box.
General| Print Technology | Laser |
|---|---|
| Print Speed (Color) | 45 ppm |
| Print Speed (Black) | 45 ppm |
| Duplex Printing | Yes |
| ADF Capacity | 100 sheets |
| Scan Resolution | 600 x 600 dpi |
| Fax | Optional |
| Max Paper Size | A3 |
| Scanner Type | Flatbed, ADF |
| Interface | USB, Ethernet |
| Supported Paper Sizes | A3, A4, A5, B4, B5, Custom |
| Copy Speed | 45 cpm |
| Operating System Compatibility | Windows, Mac, Linux |
To Next Page