Why is the watermark not printing on my Konica Minolta bizhub C450 All in One Printer?
If the watermark cannot be printed on your Konica Minolta All in One Printer, ensure the watermark is correctly set and check the density settings. Note that watermarks cannot be printed in graphics applications, so no watermark can be printed in this case.
What to do if stapling cannot be performed on my Konica Minolta bizhub C450?
If stapling cannot be performed on your Konica Minolta All in One Printer, it may be due to a large number of pages to be printed, so change the number of pages to be printed. Also, stapling is not possible if the document contains pages of different sizes, so check the document.
Why can't I specify the staple function on my Konica Minolta bizhub C450?
If the staple function cannot be specified on your Konica Minolta All in One Printer, note that stapling is not possible if “Paper Type” is set to “Thick” or “Transparency”. Check each setting in the printer driver. Also, the staple function requires optional finisher FS-507 or FS-603. Install the required optional finisher and enable it using the printer driver.
Why is paper not fed from the specified paper source on my Konica Minolta bizhub C450 All in One Printer?
If your Konica Minolta All in One Printer isn't feeding paper from the source you specified, it might be because the paper source is loaded with paper of a different size or orientation. Ensure that the paper source is loaded with paper of the appropriate size and orientation.
Why is my Konica Minolta All in One Printer not printing?
There are several reasons why your Konica Minolta All in One Printer might not be printing. It could be due to an incompatible printer driver, a disconnected cable (network, parallel, or USB), an error with the machine itself (check the control panel), insufficient memory, a queued print job (check the Active Jobs list), a print job saved in User Box or Secure Print (check the Box screen or Secure Print User Box screen), incorrect account track settings (enter the correct account name or password), or an unestablished network connection (consult your network administrator). Also, check the printer name selected and perform a test print.
How to fix 'Controller in operation' error on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer is unable to send a mail because the controller is in operation, retry sending manually when the controller is idling. If using auto transmission, the printer will automatically retry after 1 minute.
Why Konica Minolta bizhub C450 All in One Printer is unable to send a mail because the machine is in operation?
If your Konica Minolta All in One Printer is unable to send a mail because the machine is currently in operation, retry sending manually when the machine is idle. If using auto transmission, the printer will automatically retry after 1 minute.
How to correct hole punch position on Konica Minolta bizhub C450?
If the hole punch position is not as expected on your Konica Minolta All in One Printer, the orientation setting might be incorrect. Check the punch position on the layout tab of the printer driver setup dialog box.
How to adjust stapling position on Konica Minolta bizhub C450?
If the stapling position is not as expected on your Konica Minolta All in One Printer, the orientation setting might be incorrect. Check the stapling position in the printer driver setup dialog box.
What to do if Konica Minolta All in One Printer doesn't feed paper from the specified source?
If your Konica Minolta All in One Printer isn't feeding paper from the specified source, it's likely because the paper source is loaded with paper of a different size or orientation. Ensure that the paper source is loaded with paper of the appropriate size and orientation.
General| Print Technology | Laser |
|---|---|
| Print Speed (Color) | 45 ppm |
| Print Speed (Black) | 45 ppm |
| Duplex Printing | Yes |
| ADF Capacity | 100 sheets |
| Scan Resolution | 600 x 600 dpi |
| Fax | Optional |
| Max Paper Size | A3 |
| Scanner Type | Flatbed, ADF |
| Interface | USB, Ethernet |
| Supported Paper Sizes | A3, A4, A5, B4, B5, Custom |
| Copy Speed | 45 cpm |
| Operating System Compatibility | Windows, Mac, Linux |
To Next Page