What to do if Konica Minolta bizhub C450 reports 'Specified folder not found'?
If your Konica Minolta All in One Printer reports that the 'Specified folder not found', it means the folder you're trying to scan to via FTP or SMB doesn't exist. Double-check your settings and try sending the data again.
What to do if my Konica Minolta All in One Printer cannot connect to the network?
If you can't connect your Konica Minolta All in One Printer to the network, ensure the network cable is properly connected. Also, verify that the Network Setting parameters on the Administrator Setting screen are correctly specified.
What to do if Konica Minolta All in One Printer displays message “Malfunction detected”?
If the message 'Malfunction detected' appears on your Konica Minolta All in One Printer, take the following actions: 1. Write down the malfunction code (for example, C-0001) displayed on the call technical representative screen. 2. Press the auxiliary power button to turn off the control panel. 3. Use the main power switch to turn off the machine. 4. Unplug the machine. 5. Contact your Technical Representative, and inform them of the malfunction code.
What to do if the message “Misfeed detected” appears on Konica Minolta All in One Printer?
If the message 'Misfeed detected' appears on your Konica Minolta All in One Printer, follow these steps: 1. Check the illustration displayed with the error message to determine the misfeed location, and then clear the misfeed according to the appropriate procedure. 2. If the misfed paper cannot be pulled out, pull the lever for the sliding plate of the bypass tray, and then pull the sliding plate toward you. 3. Remove all paper from the bypass tray. 4. Open the automatic duplex unit door. 5. Carefully pull out any misfed paper. 6. Close the automatic duplex unit door.
What to do if a mail sending error occurs on Konica Minolta bizhub C450 All in One Printer?
If you encounter a mail sending error on your Konica Minolta All in One Printer, the system will automatically retry sending the email after a specified time. Ensure that your network environment is working correctly and that your network settings are properly configured.
Why is my Konica Minolta All in One Printer not printing?
There are several reasons why your Konica Minolta All in One Printer might not be printing. It could be due to an incompatible printer driver, a disconnected cable (network, parallel, or USB), an error with the machine itself (check the control panel), insufficient memory, a queued print job (check the Active Jobs list), a print job saved in User Box or Secure Print (check the Box screen or Secure Print User Box screen), incorrect account track settings (enter the correct account name or password), or an unestablished network connection (consult your network administrator). Also, check the printer name selected and perform a test print.
What to do if a Transmission error occurs on Konica Minolta bizhub C450?
General| Print Technology | Laser |
|---|---|
| Print Speed (Color) | 45 ppm |
| Print Speed (Black) | 45 ppm |
| Duplex Printing | Yes |
| ADF Capacity | 100 sheets |
| Scan Resolution | 600 x 600 dpi |
| Fax | Optional |
| Max Paper Size | A3 |
| Scanner Type | Flatbed, ADF |
| Interface | USB, Ethernet |
| Supported Paper Sizes | A3, A4, A5, B4, B5, Custom |
| Copy Speed | 45 cpm |
| Operating System Compatibility | Windows, Mac, Linux |
To Next Page