What does error N12 mean on Konica Minolta bizhub C550?
If your Konica Minolta All in One Printer displays error message N12, it indicates a telephone line disconnection. Check whether a network error exists, such as an unplugged cable.
What to do if Konica Minolta All in One Printer shows error N22?
If your Konica Minolta All in One Printer displays error message N22, it means conversion error. Try switching the main power supply OFF and then ON again, and then try sending the fax again.
What to do if Konica Minolta bizhub C550 All in One Printer is not receiving faxes?
If your Konica Minolta All in One Printer is not receiving faxes, several factors could be at play. First, ensure that paper is loaded into the printer. If paper is loaded, check for any paper blockages and remove them. Another reason could be an empty toner cartridge, which requires immediate replacement. Also, verify the network cable connection and properly connect it if disconnected. Lastly, a memory shortage or inadequate hard disk capacity may be the cause. In this case, check the remaining capacity of both the memory and the hard disk.
General| Print Speed (Black & White) | Up to 55 ppm |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Copier Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 kbps |
| Functions | Print, Copy, Scan, Fax |
| Scan Resolution | 600 x 600 dpi |
| Max Paper Size | A3 |
| Scan Speed (Color) | 70 ipm |
| Scan Speed (Black & White) | 70 ipm |
| Connectivity | Ethernet, USB |
| Supported Paper Sizes | A3, A4, A5, B4, B5, Letter, Legal |
| Copy Speed | 55 ppm |
| Fax Resolution | 200 x 200 dpi |
| Display | 8.5" Color LCD Touch Screen |
To Next Page
