9998 Setup menu
p. 84Playback (Slide Show) All frames
p. 84Duration (Slide Show) 5 seconds
p. 84Repeat (Slide Show) No
PPllaayybbaacckk mmeennuu
p. 99Volume 2
p. 92Auto-power-save period 1 minute
p. 93Lens accessory None
p. 94File number (#) memory Off
p. 94Folder name Standard
p. 99Audio signals 1
p. 92LCD Brightness Normal
p. 93Instant playback Off
SSeettuupp mmeennuu
p. 99Shutter FX 1
p. 87Index print No
p. 87Date print Off
p. 96Date imprinting Off
p. 99Focus signals 1
p. 100Transfer mode Data storage
p. 100Digital zoom Off
p. 101Self-timer 10 seconds
Audio signals
Every time a button is pressed, an audio signal gives a positive
confirmation of the operation. The audio signals can be turn off in
section 3 of the setup menu (p. 90). The tone of the signal can also
be changed; signal 1 is electrical and signal 2 is mechanical.
Reset default
Audio signals
VVoolluummee
––
11
11
11
22
Shutter FX
Focus signal
Focus signal
When the shutter-release button is pressed partway down, an audio signal confirms the AF system
has focused. The focus signals can be changed or turned off in section 3 of the setup menu (p. 90).
Two tones are available.
Shutter FX
When the shutter is released, a shutter sound effect gives a
positive confirmation a still image is recorded. The sound
effect can be turn off in section 3 of the setup menu (p. 90).
Two shutter effects are available. Signal 1 is taken from the
Dynax 9 SLR and signal 2 is taken from the legendary
Minolta CLE, a compact rangefinder that represents the pin-
nacle of the development of the Leitz-Minolta CL.
Volume
The volume of the audio signals and shutter FX can be increased or decreased in section 3 of the
setup menu (p. 90). The volume can be turned off. This affects the camera’s audio signals only and
will not change the playback levels of a movie clip.
To Next Page
Loading...
