What to do if Konica Minolta DiMAGE A2 Digital Camera shutter will not release?
If the shutter of your Konica Minolta Digital Camera won't release, the most likely cause is that there's no memory card in the camera. To fix this, insert a memory card.
General| Brand | Konica Minolta |
|---|---|
| Model | DiMAGE A2 |
| Category | Digital Camera |
| Image Sensor | CCD |
| Digital Zoom | 2x |
| Shutter Speed | 30 - 1/4000 sec |
| Display | LCD |
| LCD Screen Size | 1.8" |
| Viewfinder | Electronic |
| Sensor Size | 2/3" |
| Sensor Type | CCD |
| Effective Pixels | 8.0 megapixels |
| Focal Length | 7.2 - 50.8 mm |
| Aperture | f/2.8 - f/3.5 |
| ISO Sensitivity | Auto, 100, 200, 400, 800 |
| Image Stabilization | Yes |
| Storage Media | CompactFlash (Type I or II), Microdrive |
| Battery | NP-400 Li-ion |
| Lens Mount | N/A (Fixed Lens) |
| Dimensions | 117 x 85 x 114 mm |
Provides safety warnings and guidelines for using the NP-400 lithium-ion battery correctly.
Identifies and describes the main external components of the digital camera body.
Explains the process of charging the camera's lithium-ion battery using the provided charger.
Provides instructions on how to insert and remove the camera's battery.
Step-by-step guide for inserting and removing memory cards for image storage.
Instructions on setting the camera's internal clock and calendar for accurate image data.
Guides users to set the camera for fully automatic shooting modes for effortless photography.
Explains the fundamental steps for framing, focusing, and taking pictures using the camera.
Describes how to lock focus on a subject for recomposing shots or for challenging focusing situations.
Describes the camera's feature to minimize blur caused by hand shake for sharper images.
Guides users on setting up and capturing video clips using the camera's movie mode.
Provides instructions on how to delete individual images from the memory card.
Details how to select between single-shot AF, continuous AF, and manual focus modes.
Describes how to move the focus point anywhere in the image area for precise focusing.
Provides instructions for close-up photography of small objects using the dedicated macro mode.
Explains how to lock exposure settings using the AE lock button for consistent lighting.
Guides users on selecting aperture, allowing the camera to set the appropriate shutter speed for exposure.
Guides users on selecting shutter speed, allowing the camera to set the appropriate aperture for exposure.
Explains how to manually control both shutter speed and aperture for complete exposure control.
Explains how to adjust overall exposure and flash output to fine-tune image brightness.
Explains different drive modes such as single-frame, continuous, bracketing, and self-timer.
Details different metering modes like multi-segment, center-weighted, and spot for accurate exposure measurement.
Explains how to adjust white balance to ensure accurate color reproduction under various lighting conditions.
Explains how to adjust camera sensitivity (ISO) to control image brightness and noise levels.
Provides instructions on how to permanently delete images from the memory card.
Explains the process of formatting the memory card to erase all data.
Explains how to restore all camera settings to their factory default values.
Explains how to configure the anti-shake system for image stabilization.
Step-by-step instructions for connecting the camera to a computer via USB for data transfer.
Explains the safe procedure for disconnecting the camera from the computer to prevent data loss.
To Next Page