160
D
ATA-TRANSFER MODE
NAVIGATING THE PICTBRIDGE MENU
Press the central button of the
controller to select the highlighted
setting.
Use the left/right keys of the controller to highlight the appropriate menu tab; the
menu changes as the tabs are highlighted.
Use the up/down keys to scroll through the menu options. Highlight the option
whose setting needs to be changed.
With the menu option highlighted, press the right controller key; the settings are
displayed with the current setting highlighted. If “Start” is displayed, press the
center of the controller to continue.
Use the up/down keys to highlight the new setting.
Once a setting has been selected, the cursor
will return to the menu options and the new
setting will be displayed. To return to the
PictBridge screen, press the menu button.
Read the following sections on information on
the menu options.
Pressing the menu button (1) turns the menu on and off. The four-way keys of the
controller (2) move the cursor in the menu. Pressing the central button of the controller
enters a setting. The options that can be changed vary with the printer.
Activate the menu with the menu button.
2
1
To Next Page
Loading...
Need help?
General
