DSP (DIGITAL SUBJECT PROGRAM) SETUP
106
R
ECORDING MENU
The memory registers used for camera settings can be
assigned to the Digital Subject Program positions on the
exposure-mode dial. This is set in section 4 of the recording
menu (p. 80). Two options are available:
DSP - the Digital Subject Programs are active on the
exposure-mode dial.
Memory recall - the memory register are assigned to the
Digital Subject Program positions as indicated in the
illustration.
For more about Digital Subject Programs, see page 58. To
save camera settings turn to page 72.
TRACKING AF
Subject Tracking AF used in the continuous AF focus mode (p. 46) can be turned off in
section 4 of the recording menu (p. 80). When off, the position of the focus area can still
be changed with the four-way keys of the controller.
AE LOCK
AE (autoexposure) lock can be turned off and on in section
4 of the recording menu (p. 80). When AE lock is on, the
exposure is locked when the shutter-release button is
pressed partway down; the shutter speed and aperture
displays turn black to confirm the exposure lock. When AE
lock is off, the exposure continues to change with the
lighting conditions when the shutter-release button is
pressed partway down. This has no affect on the operation
of the AEL button (p. 50). When using single-shot AF with
multi-segment metering, AE lock is always active
regardless of the menu setting.
Exposure locked
DSP set DSP
Tracking AF On
AE lock Off
Spot AE area Center spot
Direct MF Off
EVF mode Motion 60fps
To Next Page
Loading...
Need help?
General
