164
T
ROUBLESHOOTING
Problem
Symptom Cause Solution
The camera
will not work.
Nothing dis-
played on the
data panel or
the monitors.
The batteries are dead.
The AC adapter is not
connected properly.
Recharge battery (p. 22).
Check that the adapter is con-
nected to the camera and a
live electrical outlet (p. 25).
The section covers minor problems with basic camera operation. For major problems or
damage to the camera or charger, or if a problem continues to reoccur frequently, contact
a Konica Minolta service facility.
“Err” displayed
on the data
panel.
The camera is hot or it
has been left in a very hot
environment.
Turn off the camera and allow
it to cool. If “Err” is still dis-
played on the camera after it
cools, remove and replace the
battery or power cord.
Shutter will
not release.
“000” is dis-
played on the
frame counter.
Memory card is full and
unable to store an image
at the image-quality or
image-size setting on the
camera.
Insert a new memory card (p.
26), delete some images (p.
41), or change the image-quali-
ty or image-size setting (p. 82).
TROUBLESHOOTING
No-card warn-
ing appears on
the monitors.
No memory card in the
camera.
Insert a memory card (p. 26).
To Next Page
Loading...
Need help?
General
