151
AUTO POWER SAVE (DATA-TRANSFER MODE)
If the camera does not receive a read or write command within ten minutes, it will shut
down to save power. When the camera shuts down, an unsafe-removal-of-device
warning may appear on the computer monitor. Click “OK.” Neither the camera or
computer will be damaged in this operation.
Unplug the USB cable and turn off the camera. Remake the USB connection by
reattaching the cable and turning the camera on.
QUICKTIME SYSTEM REQUIREMENTS
To install QuickTime, follow the instructions in
the installer. Macintosh users can download
the latest version of QuickTime free of charge
from the Apple Computer web site at
http://www.apple.com.
IBM PC / AT Compatible
Pentium processor-based PC
or compatible computer
Windows 98, Me, 2000, or XP.
128MB or more of RAM
To Next Page
Loading...
Need help?
General
