113
Installing software and downloading images
Installing USB Driver Software
- Installing from attached DiMAGE Viewer CD-ROM.
- Install the software only if you are using Windows 98 or Windows
98SE. If you are using another OS, you do not need to install this.
- Turn OFF the power supply to the camera.
- To conserve the battery, using the AC adapter (sold separately, AC-
8U/AC-8E/AC-8GB; see P.11 for details) is recommended.
1) Turn on the PC power and start Windows.
2) After connecting your camera and PC with USB cable (p.112), turn
ON the power supply to the camera.
3) The “Add New Hardware Wizard”
screen will appear.
4) Insert the DiMAGE Viewer CD-ROM
supplied into the CD-ROM drive.
5) Click “Search for the best driver for
your device (Recommended).” and
then click “Next”.
To Next Page
Loading...
