6 Image No. (Playback Frame
No./ Total Frame No.)
Your camera is capable of playing back
up to 999 frames. If there are more
than 999 frames on a card, it is not
possible to use playback.
7 Date & Time Recorded
1) Normally the time & date an image
was recorded are displayed.
2) When movie images or still images
with sound are played back, the play-
back time is displayed.
8 Image Size
1) Image size is displayed.
2) is displayed in movie images.
3) is displayed in still images with
sound.
9 Picture quality mode
The picture quality mode when the pic-
ture was shot is shown. (This is not
displayed during movie playback.)
71
Playback (Cont’d)
1
7
3
5
6
8
2
4
9
The Playback Image Display
In addition to the images you’ve taken, the following information is dis-
played.
• You can set the camera so information is not displayed (p.101).
1 Recording Media Display
The type of media in use is displayed.
• SD Memory Card or Multi-media
Card* :SD
• Memory Stick :MS
• Internal Memory :IN
* Even if a Multi-media Card is used,
“SD” will be displayed.
2 File Number
The file and directory numbers record-
ed on the card are displayed.
3 Protected Display
If an image is protected, the Protected
symbol is displayed.
4 Digital Zoom Magnification
The magnification ratio is displayed
when images are enlarged and played
back.
5 Remaining Battery Power
Display
When the battery is in use, the remain-
ing power is displayed in two levels
(p.19).
To Next Page
Loading...
