To Next Page
F
fsmithAug 20, 2025
How to fix media jam on Konica Minolta PagePro 1300W Printer?
- CChristopher JacksonAug 20, 2025
To resolve a media jam, clear the jam, close the front cover, and then continue with the print job.
How to fix media jam on Konica Minolta PagePro 1300W Printer?
To resolve a media jam, clear the jam, close the front cover, and then continue with the print job.
What to do if Konica Minolta PagePro 1300W prints too light?
If your Konica Minolta printer's print is too light, it could be due to several reasons: * The toner cartridge may be running out of toner. Remove the toner cartridge and shake it left and right a few times to distribute remaining toner. If the problem persists, replace the toner cartridge. * The toner cartridge may be defective. Remove the toner cartridge and check it for damage. Replace the toner cartridge, if necessary. * The “Contrast” and “Brightness” of an image is not set correctly in the printer driver. In the printer driver, select the Quality tab and adjust the Contrast and Brightness and try printing again.
How to fix uneven print density on Konica Minolta printer?
If you are experiencing uneven print density, it could be due to the following reasons: * The toner may be unevenly distributed inside the toner cartridge. Remove the toner cartridge and shake it left and right a few times to distribute remaining toner. * The toner cartridge may be defective. Remove the toner cartridge and check it for damage. Replace the toner cartridge, if necessary.
How to fix toner smudges on Konica Minolta PagePro 1300W Printer?
If your prints have toner smudges, consider these solutions: * The toner may be unevenly distributed inside the toner cartridge. Remove the toner cartridge and shake it left and right a few times to distribute remaining toner. * The toner cartridge may be defective. Remove the toner cartridge and check it for damage. Replace the toner cartridge, if necessary.
What to do if my Konica Minolta PagePro 1300W says 'Paper empty'?
If your printer indicates 'Paper empty', load media into Tray 1.
Why is my Konica Minolta PagePro 1300W Printer printing blank pages?
If your Konica Minolta printer is printing blank pages, the toner cartridge may be defective. Remove the toner cartridge and check it for damage. Replace the toner cartridge if necessary.
Why is my Konica Minolta PagePro 1300W printing black pages?
If your Konica Minolta printer is printing black pages, the toner cartridge may be defective. Remove the toner cartridge and check it for damage. Replace the toner cartridge if necessary.
What to do if Konica Minolta printer prints too dark?
If your Konica Minolta printer's print is too dark, it could be due to several reasons: * The toner cartridge may be defective. Remove the toner cartridge and check it for damage. Replace the toner cartridge, if necessary. * The “Contrast” and “Brightness” of an image is not set correctly in the printer driver. In the printer driver, select the Quality tab and adjust the Contrast and Brightness and try printing again.
What to do if Konica Minolta PagePro 1300W Printer shows 'Waiting for the Manual Duplex'?
If your printer displays 'Waiting for the Manual Duplex', load the second side of the media.
What does 'Video Under-run' mean on Konica Minolta printer and how to fix it?
If you encounter a 'Video Under-run' error, turn off the printer. After a few seconds, turn it back on. Also, try changing to a lower resolution.
General| Printer Type | Monochrome Laser Printer |
|---|---|
| Print Speed | 20 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Paper Capacity | 250 sheets |
| Connectivity | USB |
| Operating System Compatibility | Windows |
| Media Sizes | A4, A5, Letter, Legal, Executive |
