What to do if my Konica Minolta Printer produces no copies when I press start?
If no copies are produced even when you press the start key, it could be due to a lit icon on the control panel. Take the necessary action to correct the problem indicated by the lit icon. Alternatively, the printer may still be warming up. The printer takes about 30 seconds to complete warming up after it has been turned on.
Why my Konica Minolta Copier cannot be turned on?
If your Konica Minolta Printer cannot be turned on, check if the power cord is properly plugged into the power outlet. If not, plug it in. Also, verify if the room’s circuit breaker has tripped; if it has, close the circuit breaker.
What to do if nothing is indicated on the control panel of my Konica Minolta Copier Printer?
If nothing is indicated on the control panel of your Konica Minolta Printer, the printer might be in Power Saver mode. Press any key on the control panel to exit this mode. Alternatively, the Auto Shut OFF function may have been activated. In this case, turn the power switch off, then on.
How to fix Konica Minolta Copier Printer when keys on the control panel do not respond?
If the keys on the control panel of your Konica Minolta Printer do not respond, it could be because the interrupt indicator is lit. This means the printer is in interrupt mode. To exit this mode, press the [INTERRUPT] key.
What to do if the copy from my Konica Minolta Copier Printer has lines?
If the copy from your Konica Minolta Printer has lines, it might be because the platen glass surface is dirty. Wipe the platen glass clean with a soft dry cloth.
What to do if Konica Minolta Printer image on the copy is not aligned properly?
If the image on the copy from your Konica Minolta Printer is not aligned properly, it could be due to several reasons: * The original is not placed in the correct position. Place the original correctly on the platen glass against the original scales. * The original may not be suitable for use in the automatic document feeder. Raise the automatic document feeder and place the original on the platen glass correctly against the original scales. * The edge guide and trailing edge stop are not pressed up against the paper stack in the tray. Slide the edge guide and trailing edge stop up against the edges of the paper stack. * The paper has an excessive curl. Smooth out curl in the paper and reload the paper stack in the tray.
How to fix blurry copies from my Konica Minolta Copier?
If the copies from your Konica Minolta Printer are blurry, it could be because the paper is damp. Change the paper.
What to do if the edge of the copy from my Konica Minolta Copier is dirty?
If the edge of the copy from your Konica Minolta Printer is dirty, it could be due to several reasons: * The original pad is dirty. Wipe the original pad clean with a soft cloth dampened with neutral detergent. * You have selected paper of a size larger than the original (when the zoom ratio is full size). Select the same paper size as the original. * The original is not placed in the correct position (when the zoom ratio is full size). Select the same paper size as the original. * The reduction ratio selected is not in accord with the paper size (when the copy is made at a manually adjusted reduction ratio). Select the zoom ratio according to the paper size.
Why is my Konica Minolta Copier Printer image too dark?
If the image from your Konica Minolta Printer is too dark, the image density is likely set to “Darker.” Adjust the image density to the lighter side.
What to do if my Konica Minolta Printer image is too light?
If the image from your Konica Minolta Printer is too light, it could be because the image density is set at “Lighter.” Adjust the image density to the darker side.
General| Brand | Konica Minolta |
|---|---|
| Model | Printer Copier |
| Category | Printer |
| Language | English |
Details critical safety information, warnings, and precautions for operating the copier.
Provides information about the manual's structure and conventions.
Explains basic concepts like paper feeding, width, length, and orientation.
Details requirements for the installation site and power source for safe operation.
Provides guidelines for proper use, operating environment, and handling to ensure performance and safety.
Lists documents and items that are legally restricted from copying.
Lists main copy settings and features like 1-sided, 2-in-1, 4-in-1 copies, zoom, and output options.
Identifies and describes the functions of various copier components and optional equipment.
Illustrates and lists the names and functions of the main copier parts.
Details the function of each button, icon, and display on the control panel.
Explains how to turn the copier on/off and its initial state upon startup.
Covers functions like Panel Resetting, Power Saver, Auto Shut-OFF, and Interrupt.
Details paper types, sizes, and capacities for each tray and bypass.
Explains loading originals via Automatic Document Feeder or Platen Glass.
Details the procedure and precautions for loading originals into the Automatic Document Feeder.
Provides instructions and precautions for placing originals on the Platen Glass.
Step-by-step guide to making a basic copy of an original.
Explains how to select paper using APS or manual selection.
Describes feeding paper manually through the Bypass Tray for special paper types.
Details methods for setting zoom ratios: AMS, fixed, variable, Full Size, and X/Y Zoom.
Explains how to adjust image density in Text or Photo modes.
Allows stopping a multi-copy cycle to perform an urgent copy.
Describes ordinary 1-sided copying from a 1-sided original.
Explains Non-Sort, Sort, and Group output methods for organizing copies.
Allows erasing margins on copies, including Left, Upper, Frame, and Center erase.
Reverses the white and black parts of the original on the copy.
Shifts the image to create a file margin along the leading edge.
Allows modification of default settings via codes for various functions.
Dries the PC Drum to prevent blotchy copies caused by humidity.
Restores normal image density by replenishing toner supply.
Sets custom paper sizes for the 1st Tray when nonstandard paper is loaded.
Allows administrator to set Copy Track and Disable Auto Shut OFF functions.
Checks the total number of copies/prints produced using the COUNTER key.
Stores frequently used job settings for quick setup (Job 1 and Job 2).
Lists common error displays, their causes, and remedial actions.
Guides on adding paper when the Add Paper indicator lights up.
Guides on replacing the toner bottle when the Add Toner indicator lights up.
Identifies misfeed locations using indicators and directs to clearing procedures.
Addresses common copy quality problems like light, dark, blurry images, lines, specks, or spots.
Addresses issues like no display, non-responsive keys, or failure to turn on.
Lists detailed technical specifications for the Konica 7115 and 7118 copiers.
Provides instructions for cleaning the copier's exterior and interior components.
Shows which functions can be combined and their precedence rules.
Lists available paper sizes in metric and inch formats and corresponding zoom ratios.
To Next Page