Precautions
2
Konica 7115/7118 2-3
2.2 Operation Precautions
Operating Environment
The environmental requirements for correct operation of the copier are as follows:
G
Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C)
within an hour
G
Humidity: 15% to 85% with fluctuations of no more than 10% within an hour
Proper Use
To ensure the optimum performance of the copier, follow the precautions listed below:
-
Never place heavy objects on the Platen Glass or subject it to shocks.
-
Never open any copier doors or turn OFF the copier while it is making copies/printing, as a
paper misfeed could result.
-
Never bring any magnetized object near the copier.
-
Never use flammable sprays or liquids near the copier.
-
Always make sure that the power plug is completely plugged into the electrical output.
-
Always make sure that the copier’s power plug is visible and not hidden by the copier.
-
Always unplug the copier from the electrical outlet if the copier is not to be used for a long
period of time.
-
Always provide good ventilation when making a large number of continuous copies/printed
pages.
CAUTION
A negligible amount of ozone is generated during normal operation of this copier. An
unpleasant odor may, however, be detected in poorly ventilated rooms during extensive
copier operations.
➜
For a comfortable operating environment, it is recommended that the room be well
ventilated.
Konica7115_7118.book Page 3 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
