Konica Minolta Printer Copier - Mixed Orig; Paper Priority; Copy Priority; Density Priority

7
Using the Utility Mode
7-6 Konica 7115/7118
Mixed Orig.
Select whether to enable Mixed Orig. as the default setting.
G
The default value is “Mixed Orig. disabled.”
Paper Priority
Select a paper size or paper source that will be selected automatically when Auto Size is
selected.
G
The default value is “LetterC (8.5
x
11C).”
Copy Priority
Choose the default mode to be selected automatically when power is turned ON or panel reset,
from among “APS,” “AMS,” or “Manual.”
G
The default value is “APS.”
Density Priority
Choose the image density mode to be selected automatically when power is turned ON or panel
reset, from among “Auto,” “Manual,” or “Photo Manual.”
G
The default value is “Auto.”
Exposure Level Priority (Auto)
Choose the exposure level to be selected automatically when power is turned ON or panel
reset, from among “Lighter,” “Normal,” or “Darker.”
G
The default value is “Normal.”
Konica7115_7118.book Page 6 Friday, October 19, 2001 12:02 PM