Before Making Copies
3
Konica 7115/7118 3-17
3.6 Useful Functions
Panel Resetting
Press the [AUTO RESET] key to return all modes and functions (zoom ratio, number of copies,
etc.) to their defaults. (All selected settings are canceled.)
✎
Tip
The [AUTO RESET] key comes in handy for canceling all selected settings at one time.
To avoid accidentally using settings from the previous copy job, press the [AUTO RESET]
key to return all functions and settings to their defaults before making any setting for your
current job.
Auto Panel Reset
Without pressing the [AUTO RESET] key, the copier automatically resets all functions and
settings to their defaults 1 min after a copy cycle has been completed or a key has been
touched.
✎
Tip
The length of time before the copier automatically resets itself can be set between 30
seconds and 5 min. The Auto Panel Reset function can even be disabled.
For more details, refer to “User’s Choice” (p.7-2, p.7-8).
Konica7115_7118.book Page 17 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
