6
Advanced Copying
6-14 Konica 7115/7118
6.5 Providing a IMAGE SHIFT
The copier provides a file margin along the leading edge for ease in filing.
What is IMAGE SHIFT?
➜
The image of the original is shifted to the right to leave a
margin along the left edge of the copy.
Precautions for IMAGE SHIFT Position
Study the illustration below to be sure of the correct direction of placing the original when mak-
ing a copy with an image shift.
Setting IMAGE SHIFT
1
Position the original.
❍
Original Loading (p.4-1)
2
Press the [IMAGE SHIFT] key to light the IMAGE SHIFT
indicator.
?
Do you know how to set the image shift width?
➜
The IMAGE SHIFT width can be set in the range be-
tween 0 and 3/4, in 1-mm (1/16) increments. The de-
fault value is 1/2.
➜
To change the IMAGE SHIFT width, change the set-
ting for “IMAGE SHIFT Width Adjust” in the User’s
Choice mode. (p.7-7)
3
Make any other necessary settings.
4
Enter the number of copies to be made on the KEYPAD and then press the [Start] key.
Original Copy
Platen Glass Automatic Document Feeder
Konica7115_7118.book Page 14 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
