Konica Minolta Printer Copier - Appendix; Copier Specifications

Appendix
10
Konica 7115/7118 10-1
10 Appendix
10.1 Specifications
Copier Konica 7115/7118
Specifications Konica 7115 Konica 7118
Type Desktop
Platen Type Stationary
Photo conductor OPC
Copying System Electrostatic Dry Powdered Image Transfer to Plain Paper
Developing System Dry, 2-Component Magnetic Brush Developing
Fusing System Lamp-Heated Roller
Resolution 600dpi
Types of Original • Sheets, Books and other three-dimensional objects
• Maximum Original Size: 11×17 in.
• Maximum Original Weight: 6-1/2 lbs.
Kinds of Paper Plain paper (16 lbs. to 24 lbs.), recycled paper: 16 lbs. to 24 lbs.
Special paper: card (24-1/4 lbs. to 41-3/4 lbs.), OHP transparencies, postcards,
labels
• Special paper can only be used for the 1st Tray and Bypass Tray.
Copy Paper Size • 1st Tray
11x17L to Invoice
• Bypass Tray
Width: 3-9/16 in. to 11-3/4 in.
Length: 5-1/2 in. to 17 in.
Paper Feeding System • 1st Tray
Plain paper,recycled paper: 250 sheets
Special paper: 50 sheets
• Bypass Tray
Plain paper,recycled paper, special paper: 1 sheet
Warm-Up Time 30 seconds or less (at room temperature 73.4°F/23°C)
First Copy 7 seconds or less (when LetterC and 1st Tray are used)
Copy Speed
(Approx. copies/min)
9 (LedgerL), 11 (LegalL), 13 (LetterL),
15 (LetterC)
11 (LedgerL), 12 (LegalL), 15 (LetterL),
18 (LetterC)
Zoom Ratios Full size: 100%
Enlargement ratios: 129%, 155%, and 200%
Reduction ratios: 77%, 64%, and 50%
Variable ratios: 50% to 200% (in 1% increments)
Multiple Copies 1 to 99 copies
Exposure Control Auto Exposure Mode, Manual Exposure Mode and Photo Manual Exposure Mode
Lost Image Leading Edge: 1/6 in. (4 mm)
Trailing Edge: 1/6 in. (4 mm)
Rear Edge: 1/6 in. (4 mm)
Front Edge: 1/6 in. (4 mm)
Power Requirements 120V, 12 A, 60 Hz
Power Consumption 1.5 kW or less
Konica7115_7118.book Page 1 Friday, October 19, 2001 12:02 PM