To Next Page
J
Jeffrey TaylorAug 19, 2025
What to do if the front or top cover is open on Konica Minolta Printer?
- NNicole ReidAug 19, 2025
If your Konica Minolta Printer indicates that the front cover or top cover is open, close the mentioned cover.
What to do if the front or top cover is open on Konica Minolta Printer?
If your Konica Minolta Printer indicates that the front cover or top cover is open, close the mentioned cover.
Why is my Konica Minolta PagePro 1350W Printer printing too light?
If your Konica Minolta Printer is printing too lightly, the toner cartridge may be running out of toner or may be defective. Try removing the toner cartridge and shaking it left and right a few times to distribute remaining toner. If the problem persists, replace the toner cartridge. Also, in the printer driver, select the Quality tab and adjust the Contrast and Brightness and try printing again.
Why is my Konica Minolta PagePro 1350W printing too dark?
If your Konica Minolta Printer is printing too dark, the toner cartridge may be defective. Remove the toner cartridge and check it for damage, replacing it if necessary. Also, in the printer driver, select the Quality tab and adjust the Contrast and Brightness and try printing again.
Why is my Konica Minolta PagePro 1350W printing a blank page?
If your Konica Minolta Printer is producing blank pages, the toner cartridge may be defective. Remove the toner cartridge and check it for damage. Replace the toner cartridge if necessary.
How to resolve toner smudges from Konica Minolta PagePro 1350W Printer?
If your Konica Minolta Printer is leaving toner smudges, the toner may be unevenly distributed inside the toner cartridge, or the toner cartridge may be defective. Remove the toner cartridge and shake it left and right a few times to distribute remaining toner. Also, remove the toner cartridge and check it for damage. Replace the toner cartridge, if necessary.
How to fix uneven print density on Konica Minolta PagePro 1350W?
To address uneven print density on your Konica Minolta Printer, the toner may be unevenly distributed inside the toner cartridge, or the toner cartridge may be defective. Remove the toner cartridge and shake it left and right a few times to distribute remaining toner. Also, remove the toner cartridge and check it for damage. Replace the toner cartridge, if necessary.
How to resolve a media size error on a Konica Minolta PagePro 1350W Printer?
To resolve a media size error on your Konica Minolta Printer, load the appropriate size media into Tray 1.
Why is my Konica Minolta PagePro 1350W printing a black page?
If your Konica Minolta Printer is printing a black page, the toner cartridge may be defective. Remove the toner cartridge and check it for damage. Replace the toner cartridge, if necessary.
What to do if Konica Minolta Printer says there is no media in the tray?
If your Konica Minolta Printer indicates there is no media in the specified tray, load the appropriate type of media into Tray 1.
Why are there irregularities on prints from my Konica Minolta Printer?
If you notice irregularities on prints from your Konica Minolta Printer, the media may have absorbed some moisture due to high humidity or direct contact with water. Replace the media you are using with dry media and try printing again.
General| Color | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 13 s |
| Print speed (black, normal quality, A4/US Letter) | 20 ppm |
| I/O ports | USB |
| Power requirements | 220/240V, 50/60Hz |
| Standard media sizes | A4, A5, Folio (A4 Plus), Statement, Letter, Letter Plus, UK Quatro 8x10\ |
| Recommended media weight | 60 - 163 g/m² |
| Power consumption (active) | 400 W |
| Compatible operating systems | Windows 98SE/2000/Me/XP |
| Internal memory | 8 MB |
| Processor model | Naltec N1 |
| Built-in processor | Yes |
| Sound power level (standby) | 35 dB |
| Sound pressure level (printing) | 54 dB |
| Maximum print size | 210 x 297 mm |
| Media types supported | Plain paper, Recycled paper, Thick stock, OHP transparencies, laser-quality labels, envelopes & Japanese Post Office standard postcards |
| Maximum ISO A-series paper size | A4 |
| Total input capacity | 150 sheets |
| Total output capacity | 100 sheets |
| Sustainability certificates | ENERGY STAR |
| Power consumption (standby) | 15 W |
| Power consumption (printing) | 900 W |
| Certification | UL, cUL, FCC-B, DOC, VCCI, CE Marking, C-Tick, CDRH |
| Storage temperature (T-T) | 0 - 35 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 10 - 85 % |
| Operating relative humidity (H-H) | 15 - 85 % |
Weight and Dimensions| Dimensions (WxDxH) | 385 x 257 x 250 mm |
|---|
