Konica Minolta PK-520

To Next Page

E-1

PK-520 Punch Kit

INSTALLATION MANUAL

A3ET-9550-01

Applied Machines: C754e/C654e/C754/C654/C554e/C454e/C364e/C284e/C224e/C554/C454/C364/C284/C224/

C368/C308/754e/654e/754/654/554e/454e/364e/284e/224e/367/287/227

COLOR MFP: 75 ppm/65 ppm/55 ppm/45 ppm/36 ppm/30 ppm/28 ppm/22 ppm

MFP: 75 ppm/65 ppm/55 ppm/45 ppm/36 ppm/28 ppm/22 ppm

Product Code: A2X0/A2X1/A5AY/A5C0/A5C1/A5C2/A5C4/A2XK/A4FJ/A161/A4FK/A4FM/A7PU/A7PY/A55V/

A5YN/A61D/A61E/A61F/A61G/A61H/A789/A7AH/A7AK

1. Accessory parts

Note:

• This manual provides the illustrations of the

accessory parts and machine that may be

slightly different in shape from yours. In that

case, instead of the illustrations, use the

appearance of your machine to follow the

installation procedure. This does not cause any

significant change or problem with the proce-

dure.

• If none of the later steps instruct you to use the

parts including screw and cover that you

removed following the instructions described in

this manual, discard them.

2. Installation procedures

Note:

When mounting the punch kit, mount it before

mounting the finisher to the machine.

(1) Turn OFF the power switch and unplug the

power cord from the power outlet.

(2) Remove the protective tape.

No. Name Shape Q’ty

1. Punch unit

2. Punch box

3. Label

4. Installation

manual

set

Keep this bag away from babies and

children. Do not use in cribs, beds,

carriages, or playpens.

The thin film may cling to nose and

mouth and prevent breathing. This bag is

not a toy.

Need help?

Do you have a question about the Konica Minolta PK-520 and is the answer not in the manual?

Summary

Accessory Parts

Installation Procedures

Configuration Procedures

Punch Option Setting

Configure punch settings, including the desired number of holes, via the service mode.

Adjustment Procedures

Punch Hole Deviance Adjustment

Check for and adjust any deviations in punch hole positions using test copies.

Punch Hole Position Adjustment

Fine-tune the punch unit's position using guide marks to ensure accurate hole placement.

Punch Regist Loop Size Adjustment

Adjust the punch registration loop size to correct tilt in the output paper.