To Next Page
R
Ryan NguyenAug 1, 2025
What to do if Konica Minolta Measuring Instruments show ERROR [XXXXX] PLS RESTART?
- SSamantha DurhamAug 1, 2025
If your Konica Minolta Measuring Instruments display the error message ERROR [XXXXX] PLS RESTART, try the following steps: 1. Open and close the front cover. This simple action can resolve most errors. 2. If the error persists, turn the device OFF using the operation button, then turn it back ON to restart. 3. If the error still persists, switch OFF and then ON the power breaker, before pushing the operation button to restart the device. Use this method only if the first two are ineffective. 4. If none of the above steps work, contact your Technical Representative.
General
