Konica Minolta Sindoh N512 - User Manual

2016. 3
Ver. 1.02
This Service Manual (Ver. 1.02) describes
bizhub 367/bizhub 287/bizhub 227/bizhub 136DN/bizhub 128DN/
bizhub 122DN/ineo 367/ineo 287/ineo 227/Sindoh N502/
Sindoh N501/Sindoh N500/Sindoh MF3091/Sindoh MF2101/
Sindoh MF2041/Sindoh N512/Sindoh N511/Sindoh N510/
Sindoh N517/Sindoh N516/Sindoh N515
(Version: G00-27)
SERVICE MANUAL
SECURITY FUNCTION
367/287/227

Summary

Machine Installation and Setup

Operation Control Precautions

Accessing Service Mode

6.1 Service Mode Access Method

Step-by-step guide to access the machine's service mode using a CE password.

6.2 Service Mode Access Lock

Information on releasing the service mode access lock and managing illegal access counts.

6.2.1 Access Lock Release Procedure

Detailed procedure to release the service mode access lock.

Enhancing Security Function

7.1 Details of Settings

Overview of security settings, including CE authentication, passwords, and function restrictions.

7.2 Security Enhancing Procedure

Step-by-step guide to enhance the machine's security functions.

7.2.1 Making and Checking Service Settings

Procedure for configuring and verifying service settings for enhanced security.

7.2.2 Administrator Requests

Settings and checks required from the administrator for enhanced security.

7.2.3 Functions Disabled by Enhanced Security Mode

List of functions that are disabled when Enhanced Security Mode is enabled.

7.2.4 Functions Changed by Enhanced Security Mode

Details on how Enhanced Security Mode affects various machine functions and their settings.

Service Mode Functions

8.2 CE Authentication Function

Function for service engineer identity verification using a CE password.

8.2.1 Setting the CE Authentication Function

Procedure to enable CE Authentication in the Enhanced Security settings.

8.3 Administrator Password Function

Function for setting or resetting the administrator password.

8.3.1 Setting the Administrator Password

Steps to set or change the administrator password.

8.4 CE Password Function

Function to change the CE password used for accessing Service Mode.

8.4.1 Setting the CE Password

Procedure to change the current CE password.

8.6 HDD Format

Procedure for formatting the HDD, which clears various data and settings.

8.6.1 HDD Format Execution Procedure

Step-by-step guide to perform HDD physical or logical formatting.

8.8 Operation Ban Release Time Setting

Function to set the duration before the access lock state is released.

8.8.1 Operation Ban Release Time Setting Procedure

8.9 Administrator Unlocking Function

8.9.1 Administrator Unlocking Function Procedure

Overwrite All Data Function

9.1 Overwrite All Data Procedure

Procedure to overwrite and delete all data on the HDD and reset passwords.

9.2 Items Cleared by Overwrite All Data

Firmware Rewriting

10.2 USB Memory

10.2.1 Preparation

10.2.2 Procedure

10.2.2 Procedure (Continued)

6. Control Panel Firmware Update Selection

FAX Function

11.1 Installing;Setting Procedure of the FAX Kit

11.1.1 Install Procedure

11.1.5 Setting Procedure

A. Setting the FAX

Konica Minolta Sindoh N512 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Print Speed (Black)	52 ppm
Paper Capacity	550 sheets
Duplex Printing	Yes
Connectivity	Ethernet
Printer Type	Laser
Display	7-inch color