Need help?Do you have a question about the Konig DVB-T FTA17 and is the answer not in the manual?
Guides through the initial channel scan and setup process.
Configures the on-screen display language for the receiver interface.
Sets video output parameters like aspect ratio and video standard.
Adjusts region settings and time synchronization for the receiver.
Sets an automatic power-off timer for the receiver.
Customizes the appearance of on-screen display elements.
Enables password protection for menus and channels.
Controls the power status of the receiver's tuner.
Resets the receiver to its original default settings.
Guides through the initial channel scan and setup process.
Configures the on-screen display language for the receiver interface.
Sets video output parameters like aspect ratio and video standard.
Adjusts region settings and time synchronization for the receiver.
Sets an automatic power-off timer for the receiver.
Customizes the appearance of on-screen display elements.
Enables password protection for menus and channels.
Controls the power status of the receiver's tuner.
Resets the receiver to its original default settings.
Tuner and Channel| frequency range | 51MHz to 860MHz |
|---|---|
| channel bandwidth | 6/7/8MHz |
| demodulation | COFDM 2K, 8K |
MPEG Transport Stream & A/V Decoding| frame rate | 25Hz for PAL, 30Hz for NTSC |
|---|---|
| video resolution | 720x576 (PAL), 720x480 (NTSC) |
| sampling rate | 32, 44.1, 48kHz |
Operating Environment| operating temperature | 0 ~ 40oC |
|---|---|
| operating humidity range | 10 ~ 85% RH |
| non-condensing | Non-condensing |
To Next Page