Need help?Do you have a question about the Kontron KTQM67/mITX and is the answer not in the manual?
Step-by-step guide for installing the motherboard.
Safety requirements for chassis interface connectors according to IEC60950.
Summary table of features for KTQM67 variants.
Block diagram of architecture and main components.
Detailed list of supported CPUs and their specifications.
Information on DDR3 SODIMM sockets and memory features.
Details on Intel HD Graphics 4000 and 3000 capabilities.
Power requirements and consumption examples for different configurations.
Diagram showing connector locations on the mITX frontside.
Diagram showing IO bracket area connectors on the mITX.
Diagram showing backside connectors on the mITX.
Diagram showing connector locations on the Flex board.
Diagram showing backside connectors on the Flex board.
Diagram showing connector locations on the ATXP board.
Diagram showing backside connectors on the ATXP board.
Details on DVI, DP, eDP, and LVDS interfaces.
Information about the three 10/100/1000Mb Ethernet ports.
Overview of USB 2.0 ports and their configurations.
Details on the 7.1+2 Channel High Definition Audio connector.
Details on ATX/BTX and ATX+12V power connectors.
Information on 4-pin and 3-pin fan connectors.
Pinout and description for PS/2 keyboard and mouse connector.
Details on internal eDP and LVDS display connectors.
SATA host controller and connector pinning.
Information on internal USB connectors (ports 6-13).
Details on IEEE1394 ports and their pinouts.
Pinout and signal definitions for serial ports.
Pinout and signal definitions for the parallel port.
Internal audio connectors including CDROM input and audio header.
Pinout and signal definitions for the front panel connector.
Pinout and signal definitions for the feature connector.
Instructions for using the BIOS default settings jumper.
Procedure for recovering corrupted BIOS using the SPI jumper.
SPI connector details for BIOS connection.
Details on the XDP-CPU debug port connector.
Details on the XDP-PCH debug port connector.
Information on PCIe x16, PCIe x1, and miniPCIe slots.
Details on PCI slot connectors for Flex and ATXP models.
Table showing memory address ranges and descriptions.
List of PCI devices with Vendor/Device IDs and chip information.
Table mapping IRQs to system devices.
Table showing IO address ranges and their descriptions.
Overview of the BIOS Main screen and changeable settings.
Main menu for advanced BIOS configurations.
Settings related to PCI bus driver and 64-bit resources.
Configuration for ACPI auto configuration and sleep states.
Settings for security device support and TPM.
CPU-specific settings like Hyper-Threading and virtualization.
Configuration for SATA controllers, modes, and speeds.
Settings for Intel Trusted Execution Technology.
Configuration for Intel Active Management Technology.
Settings for automatic acoustic management of storage devices.
Configuration for Legacy USB support and EHCI hand-off.
Settings for running SMART Self-Test on HDDs.
Configuration for serial and parallel ports.
Displays system voltage readings.
Settings for fan control and temperature monitoring.
Settings for LCD panel voltage and backlight.
Configuration for Ethernet devices and Wake on LAN.
Setting for delaying BIOS boot for device detection.
Configuration for serial port console redirection.
CPU power management settings like EIST and Turbo Mode.
Settings for PCI Express, USB, and PCH Azalia.
Configuration for VT-d, CHAP, Thermal, NB CRID, and BDAT.
Options to force boot from specific devices.
Settings for CSM launch and OpROM policies.
Policy for image execution on security violation.
Management of Secure Boot keys.
Settings for HDD user and master passwords.
List of beep codes related to the boot block.
List of beep codes generated during POST.
Actions to take based on POST beep codes.
General| Brand | Kontron |
|---|---|
| Model | KTQM67/mITX |
| Category | Motherboard |
| Language | English |
To Next Page
