Need help?Do you have a question about the Kontron KTQM87/mITX and is the answer not in the manual?
Step-by-step guide for installing the motherboard, including PSU, RAM, cooler, and interfaces.
Summarizes the features of the KTQM87/mITX embedded motherboard.
Covers I/O control, peripheral interfaces like USB, Serial ATA, and LAN support.
Covers operating/storage conditions, ESD/EMI, safety standards, shock, vibration, MTBF, and RoHS compliance.
Table listing compatible processors, their specifications, and thermal design guidelines.
Details on memory features, supported frequencies, and Kontron memory modules.
Information on Intel HD Graphics 4600/5200, DP interface, and display support.
Details on power requirements and operational voltage tolerances for safe system operation.
Diagram and labels identifying frontside connectors on the motherboard.
Diagram and labels identifying backside connectors on the motherboard.
Information on USB 2.0 and USB 3.0 ports, including cabling requirements and connector pinouts.
Pinout and usage details for the ATX+12V-24p and ATX+12V-4p power connectors.
Details on SATA ports, supported features, and connector pinning for disk connections.
Instructions for using the J5 jumper to load default BIOS settings and clear passwords.
Configuration options for boot behavior, including NumLock, timeout, CSM support, and USB legacy.
Access to advanced system settings, including language and various hardware configurations.
Options to configure processor cores, HT technology, Flex Ratio, XD, CPUID, BIST, and virtualization.
Settings for Intel SpeedStep, Turbo Mode, power limits, and C-States for power optimization.
Settings for SATA devices, interface combination (IDE/AHCI/RAID), port enable, hot-plug, and device type.
Settings for memory frequency, TOLUD, NMode, scrambler, DIMM control, remap, and fast boot.
Settings for graphics turbo, primary display, internal graphics, GTT size, aperture, DVMT, and low power mode.
Configuration for PEG (PCI Express Graphics) ports, including speed, ASPM, and equalization settings.
Options for GPIO lockdown, RTC lock, BIOS lock, and SMM lock features.
Settings for system and CPU temperature, fan speed control, and watchdog function.
Settings for onboard LVDS, resolution, panel manufacture, VCC, and backlight control.
Settings for Intel Active Management Technology (AMT), including wait timers and remote assistance.
Settings for Intel Management Engine (ME) and Anti-Theft Technology.
Settings for thermal monitor, PROCHOT#, VR thermal alert, and ACPI T-States.
Settings for secure boot, passwords, user authentication, and HDD password.
Defines the boot device priority sequence for operating system loading.
General| Brand | Kontron |
|---|---|
| Model | KTQM87/mITX |
| Category | Motherboard |
| Language | English |
To Next Page
