Need help?Do you have a question about the Kontron mITX-SKL-H and is the answer not in the manual?
Describes applications where the product must not be used due to safety risks.
Provides essential safety instructions for product handling and operation.
Details precautions for handling electronic components and lithium batteries.
Lists changes made in different versions of the user guide.
Provides contact information and resources for product support.
Outlines requirements for installing the board in a chassis.
Step-by-step guide for physically installing the motherboard.
Instructions and precautions for replacing the CMOS battery.
Visual representation of the motherboard's architecture and components.
Details the main features and specifications of the motherboard components.
Describes I/O ports, LAN, and expansion capabilities.
Covers power input requirements and battery information.
Details the system's hardware monitoring capabilities.
Specifies operating and storage temperature and humidity ranges.
Lists compliance with industry standards and certifications.
Details compatible Intel processors for the motherboard.
Information on supported memory types, speeds, and capacity.
Describes the integrated Intel HD Graphics capabilities.
Details power usage under various conditions and supply voltage requirements.
Identifies and locates connectors on the top side of the board.
Identifies and locates connectors on the I/O panel.
Identifies and locates connectors on the rear side of the board.
Explains terms used for pin assignments and signal descriptions.
Details the pin assignments for DP and mini DP connectors.
Describes the RJ45 LAN connectors and their pin assignments.
Details USB ports available on the I/O panel.
Describes the 3-pin audio connector and its pin assignments.
Details the DC power input connector and its pin assignments.
Details the 4-pin ATX power connector pin assignments.
Describes the fan connectors and their pin assignments.
Details the SATA connectors and their pin assignments.
Details the internal USB 3.0 connector and its pin assignments.
Describes the speaker connector and its pin assignments.
Describes the SPDIF-OUT connector and its pin assignments.
Details the front panel header pin assignments.
Describes the RS232 serial port and its pin assignments.
Describes the RS422/485 serial port and its pin assignments.
Details the LVDS connector pin assignments.
Describes the feature connector and its pin assignments.
Details the SPI connector pin assignments.
Describes the SPI connector for GPIO expander.
Explains the function and setting of the Always On jumper.
Describes the Clear CMOS jumper function.
Explains the jumper for loading BIOS default settings.
Details the PCI-Express x16 slot and its pin assignments.
Describes the miniPCIe, mSATA, USB2.0, and SIM card slots.
Details the M.2 connector and its specifications.
Instructions on how to enter the BIOS setup.
Describes the main BIOS setup menus.
Details the options available in the Advanced BIOS menu.
Explains CPU power management settings in BIOS.
Provides details on PCH firmware configuration.
Covers security and power management settings.
Information on Self-Monitoring, Analysis and Reporting Technology settings.
Describes how to configure serial console redirection.
Groups various configuration settings like TXT, Graphics, Network, USB.
Groups settings related to system monitoring, LAN, and LVDS display.
Overview of Chipset configuration options.
Details System Agent (Northbridge) settings.
Details PCH-IO (Southbridge) settings.
Covers password settings and secure boot options.
Describes boot device order and settings.
Explains how to save changes and exit BIOS setup.
Provides definitions for common technical acronyms.
Provides information about Kontron, the manufacturer.
General| Brand | Kontron |
|---|---|
| Model | mITX-SKL-H |
| Category | Motherboard |
| Language | English |
To Next Page
