Need help?Do you have a question about the Koolaire KDT0500A and is the answer not in the manual?
Lists all Koolaire KT model numbers covered in this manual.
Explains the designation system for ice machine model numbers.
Outlines voltage, fuse, and wiring requirements for safe operation.
Step-by-step guide for cleaning and sanitizing the ice machine's interior.
How to enter and use the control board's test mode for diagnostics.
Systematic steps to identify why the ice machine is not starting.
Troubleshooting steps for when the harvest cycle fails to initiate properly.
Diagnosing premature harvest cycles related to the float switch.
Methods to check and verify the ice machine's daily ice production rate.
Analysis of ice formation on the evaporator for diagnostic purposes.
Procedure for checking and interpreting discharge pressure readings.
Method for analyzing suction pressure to diagnose refrigeration issues.
Explanation of the harvest valve's function and troubleshooting its operation.
Procedure for comparing evaporator temperatures for diagnostics.
How to analyze discharge line temperature for important diagnostic clues.
Comprehensive guide for diagnosing refrigeration system components.
Steps for diagnosing compressor electrical issues, including resistance checks.
How to test the fan cycle control for proper operation.
Procedure for checking the HPCO control's cut-out and reset points.
Procedures for verifying the correct refrigerant charge amount.
Procedures for checking and diagnosing the water regulating valve.
Definitions and procedures for recovering and evacuating refrigerant.
Step-by-step guide for safely recovering and recharging refrigerant.
Requirements for restoring contaminated refrigeration systems.
Detailed steps for cleaning systems with mild contamination.
Procedures for cleaning systems that have experienced severe contamination.
Method to replace components without discharging the refrigerant.
To Next Page
General