Page 2
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.
BEFORE USE
Inspect the product including its cable and plug for any signs
of damage. If the product is damaged, DO NOT use it, and
contact your supplier immediately. The appliance contains a
refrigerant gas, so must be kept upright at all times. After
unpacking wait 3 hours for the refrigerant gas to stabilise
before use.
INSTALLATION
Stand the CLIMATEASY 14 on a firm, flat, level surface.
Connect the exhaust hose as follows: expand a small section
of the end, and screw into the indoor adaptor; then slide the
indoor adaptor into the slot at the back of the unit. Expand a
small section of the other end of the hose, and screw into the
fish-tail-shaped adaptor.
To Next Page
Loading...
