INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and follow the
instructions provided with any tools listed here.
TOOLS NEEDED
•
Tape measure
•
Flat-blade screwdriver
•
Phillips screwdriver
•
Level
•
Cordless electric drill
•
Hammer
•
Wrench or pliers
•
Pipe wrench
•
10" Adjustable Wrenches (2)
•
•
¼" nut driver
•
•
Marker or pencil
•
Masking tape
•
Pipe-joint compound resistant to LP gas
•
•
Noncorrosive leak-detection solution
To Next Page
