6
2.2 Installing in Vehicles
Please refer to the quick installation.
2.2.1 Mount the lens
1. Attached the lens to your window using the sticker.
2. Rotate and tilt the lens to the right position.
2.2.2 Mount the device
1. Hide the DVR inside your car. Or mount it on your windshield with the
suction cup.
2. Connect the cables.
2.2.3 Connecting to Power
Use only the supplied car adapter to power up the device and charge the
built-in battery.
1. Connect one end of the car adapter to power port of the DVR.
2. Plug the other end of the car charger to the cigarette lighter socket of
your vehicle. Once the vehicle engine is started, the DVR powers on
automatically and starts cycle recording.
To Next Page
Loading...