19
Connect your DVR to computer, name your new database file to “gpsdb.txt”.
Put this txt file under the root of the card. Turn on the device, and it will
update automatically. After successfully updating, this file will disappear
which you can connect the card to computer to check.
*The speed cam warning screen may differ from different firmware, please
make sure you get the latest one.
3. Adjusting the Settings
Settings may change without prior notice.
3.1 Using the Menu
3.1.1 Recording Setting
Press [Menu] to enter into setup. Here you can see 4 settings of video. For
detail, please check the menu tree of each settings.
To Next Page
Loading...