outlet and check that the main body has completely cooled down.
1. Clean the appliance after each use: to facilitate the cooling process of the main body remove the
basket and frying compartment from it.
2. Wash the basket and frying compartment with water and dish washing detergent. Prevent water
from entering the basket handle and front panel of the frying compartment.
3. o not wash the frying compartment or basket in dishwasher and/or use abrasive materials as
these are coated with non-stick material that can be damaged by such washing methods.
4. Clean the main body of the appliance only with a damp cloth and do not use any kind of soap.
5. If necessary, clean possibile food residues in the main body frying compartment housing as
follows: wait for the appliance to cool down completely, proceed to clean only with a slightly damp
cloth and immediately after dry completely using a dry cloth.
6. Do not immerse the power cord, plug or main body of the appliance in water or other liquids in
order to avoid hazards of fire, electric shock, or damage to people.
7. Gently proceed to dry the washed parts by using a dry cloth, then as semble again all the appliance
parts again and store it in a dry and dust-free place until next use.
8. Regularly clean the air inlet and outlet openings with a brush so as not to impair the air inlet in
and out.
Tip:
if there is persistent fat/dirt on the bottom of the frying compartment, pour a suicient amount of hot
water and wait for about 10 minutes, then add a suitable amount of dish soap and proceed to clean it
with a non-abrasive sponge
STORING THE FRYER.
1. Unplug the product from the power outlet and let it cool down completely.
2. Make sure all components are clean and dry.
3. Coil the power cord.
To Next Page
Loading...