31
TECHNICAL SPECIFICATIONS
INSTALLATION
1. Arch Structure/Air Duct
2. Air vents
3. LED Screen
4. Plastic air filter cover
5. Air inlet holes
6. Base
7. Appliance body
8. Power cable/physical power on/off button
Voltage 220-240 V
Power 35 W (Fan) / 2000 W (Fan Heater)
Microparticles ltering efciency PM 10 e PM 2.5 99.92 %
Air ow 48 m3/h
Reachable Surface 40 m2/h
2 HEPA lters included
1. Place the appliance on a flat, stable and non-slip surface. Do not place the
appliance on an unstable surface (e.g. inclined or soft) in to avoid risk of fal-
ling over. Do not place in hot and humid areas such as bathroom or kitchen.
2. Do not cover the vents and/or air inlet holes during operation of the ap-
pliance. Place the appliance away from curtains to prevent them from acci-
dentally blocking the air inlet/outlet which would prevent the product from
working properly.
To Next Page
Loading...
