29
• Switch off and unplug the unit.
• Ensure all water is removed and the appliance. Allow the unit to
run for 1 – 2 hours without water so as to dry it quicker. More time
may be required depending on how humid the ambient air is.
• Coil the power cord loosely and place next to the unit.
• Remove the Batteries from the Remote Control.
• When the appliance it totally dry, store in a dry well-ventilated
area.
6 Storage
INFORMATION REQUIREMENTS
READ AND SAVE THESE INSTRUCTIONS
• It is recommended to clean periodically the elements in contact
with water with anti-scaling and decalcifying agent.
To Next Page
Loading...
