Kopp Free-control User Manual

1
1
2
3
4
37

Dimming mode
Description Connection of the universal radio transmitter to a customary
pushbutton used for dimming control.
Application Individual dimming of up to two radio receiver groups.
Connectivity Up to two pushbuttons for the dimming operation can be simultane-
ously connected to a universal radio transmitter.
DIP switch
Setting
Select mode C. To activate the mode A, remove battery for at least
30 seconds and then reinsert the battery.
Set DIP switch position 1 to ON
Set DIP switch position 2 to OFF
Pinning diagram Connect 1st pushbutton to the input channel
1/2.
Connect 2nd pushbutton to the input channel
3/4.
Switching
operation
1 If „OFF“, inch pushbutton 1x: radio signal „ON“ is transmitted
1 If „ON“, inch pushbutton 1 x: radio signal „OFF“ is transmitted
Dimming
operation
1 Press pushbutton and keep it pressed: Dimming operation starts.
The consumer (lamp) light/dark is activated. At the desired lumi
nosity, release the pushbutton.
LED signalling With every signal emission, the universal radio
transmitter‘s LED flashes shortly.
actuation point on operating rocker actuation point on operating rocker

Kopp Free-control Specifications

General

Brand	Kopp
Model	Free-control
Category	Ventilation Hood
Language	English