Kopp Free-control User Manual

1
1
2
3
4
38

Dimming mode - Sequence pushbutton
Description Connection of the universal radio transmitter to a customary sequence
pushbutton used for dimmer activation.
Application Individual dimming of up to two radio receiver groups.
Connectivity One sequence pushbutton can be connected to the universal radio
transmitter, if both sequence pushbutton contacts should be used.
Up to two sequence pushbuttons can be simultaneously connected
to the universal radio transmitter, if only one sequence pushbutton
contact of either sequence pushbutton is used.
DIP switch
Setting
Select mode C.
Set DIP switch position 1 to ON
Set DIP switch position 2 to OFF
Pinning diagram Connect 1st pushbutton to the input channel 1/2.
Connect 2nd pushbutton to the input channel
3/4.
All switch positions (2x ON, 2x OFF) must be
teach to the receiver.
Switching
operation
1 1 If „OFF“, inch pushbutton 1x: radio signal „ON“ is transmitted
1 1 If „ON“, inch pushbutton 1 x: radio signal „OFF“ is transmitted
Dimming
operation
1 Press pushbutton and keep it pressed:
Dimming operation starts. The consumer (lamp) light/dark is
activated. At the desired luminosity, release the pushbutton
LED signalling With every signal emission, the universal radio
transmitter‘s LED flashes shortly.
actuation point on operating rocker

Kopp Free-control Specifications

General

Brand	Kopp
Model	Free-control
Category	Ventilation Hood
Language	English