EasyManua.ls Logo

Koppl CL Series - Engine

Koppl CL Series
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 33
Version 01-2010
Maintenance
Compakt-Light
If the adjustment is unsuccessful, you must take the machine to an authorised workshop.
4. Engine
Caution!
It is essential to pay attention to the engine manufacturer’s operating manual.
Do not leave the engine running in a closed room – danger of poisoning!
Always close the petrol tap when the machine is parked and during transport and repairs.
Do not carry out any maintenance with the engine running!
Secure the parked
2-wheel tractor against rolling away and tipping over!
Refuel only with the engine switched off – no smoking!
Pay attention to the prescribed quality of oil and fuel and store both only in approved con-
tainers!
Caution when draining off hot oil – danger of being burnt!
Attach the safety devices again after maintenance work!
Caution!
During the first 20 hours of operation (the running-in period) the engine should not be operated
up to its performance limit. As a matter of principle, even after the running-in period, the throt-
tle should never be applied more than is absolutely necessary for carrying out the respective
work.
Work in an environmentally-friendly, fuel-saving manner!
Fig. 19. Tensioning lever. Fig. 20. Tension spring – power take-off drive.
Tensioning lever
- OFF position -
tension spring
relaxed
Adjusting screw
Wheel drive
Bowden cable
Tensioning lever
- ON position -
tension spring
stretched
L + 5 to 8 mm
L
Lock nut