25
● SUBT: Allows the selection of the audio / subtitle stream in video playback from USB
or in DVBT mode (if available).
● FAV: Displays the list of favorite channel lists.
● MUTE: Allows you to disable / reactivate the volume.
● CH + / CH-: Allows navigation in a menu or change channels (next / previous).
● 0-9 (Numeric Buttons): Type the channel number you want to display.
● TV / RADIO: Switch between TV mode and RADIO mode and vice versa.
● RECALL: Allows to return to the last channel displayed.
The p
o
rammable remote RC control may not be perfectly
compatible with some remote controls available on the market.
Please note that this is not a product defect.
The EPG function allows information on channel pro
rammin
up
to a maximum of 7 days. This information depends on the individual
channel.
Pro
rammin
must be carried out for each individual key, carefully
following the instructions below:
The remote control has 4 programmable buttons for controlling
the TV: TV Power, Vol +, Vol-, TV/AV.
Long press the SET button for 10 seconds, the red LED will be
from low light to brighter light, release the SET button.
Place the learning and the original remote control from the TV
opposite to each other at a distance of 2-3 cm and pay attention
on IR aligmement.
Press and release the learning remote control button you want
to program, the red LED will light blinking.
[TV RC] Press the button of the original remote control, the LED
should blink 2 times and light constantly, release the button.
When learning is completed, press the SET button, the LED
will turn off.
Repeat this for the other buttons.
The battery charge should be as high as possible.
To Next Page
Loading...
